Fouled core surfacing: an UltraTechno 1300 lift brings a cooler core to drain.
What you are looking at
A cooler core coming up out of the bath on the lift, draining as it rises. The core went in fouled. What you are watching is the moment the result becomes visible, and it is also the moment that decides whether the job was done properly, a core lifted too quickly carries dirty liquid back through its own passages on the way out.
Why coolers and heat exchangers suit ultrasonics
A cooler core is the hardest shape there is to clean by any method that relies on reaching the surface. The fouling is inside narrow passages and between fins, where a jet cannot aim and a brush cannot go. Ultrasonic cleaning does not have to reach: the liquid carries the cleaning everywhere it can flow, and cavitation works on the surfaces it touches.
Two things decide the result. The core has to be oriented so the passages fill and the trapped air can get out, and the bath has to hold temperature once a large cold mass goes into it. Get either wrong and the middle of the core stays dirty while the outside looks perfect.
What to expect
- Soil comes out of the passages, not just off the faces.
- No dismantling, no rodding, and nothing mechanical touching the fins.
- A repeatable cycle, so the second core is cleaned like the first.
- A pressure test afterwards still tells you whether the core is sound, cleaning does not hide a leak, it usually finds one.
Send us a fouled one
We will clean it, photograph it, and give you the cycle card. If ultrasonics is not the right answer for your fouling we will say so.
Every clip here is a documented job
Where an application needs proving, we clean, film, gauge and document it, and the process card stays with the customer.