Platform lift, in and out of the bath on the clock.
What you are looking at
The platform lift taking a load in and out of the bath on the clock. The lift is driven by the programme, not by the operator. It goes in, dwells for the set time, and comes out. Nobody stands over it deciding when it has had enough.
That is the point of a powered platform. A cycle run by hand varies with the shift, the day and how busy the floor is. A cycle run by the machine is the same every time, which is what you need if the result has to be repeatable or has to be signed for.
Why the lift matters more than people expect
- It keeps the part off the tank floor. A part resting on the transducer plate sits where the field is harshest, and it will mark.
- It controls the entry. Lowering steadily lets trapped air escape from blind holes and cavities. Air pockets do not clean.
- It controls the exit. Holding the basket above the bath to drain puts the drag-out back where it belongs instead of on the floor.
- It takes the weight. Lifting loaded baskets by hand all day is how people hurt their backs.
Specifying one
The lift is sized to the heaviest loaded basket, not the empty one, and the tank is sized to the largest part. Tell us the part, the soil and how many you put through in a shift, and we will come back with the machine and the cycle to run in it. If you want proof first, send the part and we will run a documented trial.
Every clip here is a documented job
Where an application needs proving, we clean, film, gauge and document it, and the process card stays with the customer.