Home / Videos / EVS 7000-PL cleaning tank
EvoSonic EVS 7000-PL · heavy industry

EVS 7000-PL: the ultrasonic cleaning tank

The EVS 7000-PL ultrasonic cleaning tank at work.

What you are looking at

An EVS 7000-PL working on heavy industrial parts. It runs at 25 kHz: a coarse frequency, chosen deliberately. The lower the frequency, the larger and more violent the cavitation bubbles, and the better it strips heavy bonded soil off rugged metal. It is the wrong choice for a polished component and the right choice for a casting covered in carbon.

The platform lift is doing the work you can see. Parts at this weight are not lowered by hand, and a part dropped onto the tank floor sits on the transducer plate where the field is strongest and the damage is worst. The platform holds the load in the body of the bath where the cleaning happens.

Matching the frequency to the part

  • 25 kHz heavy carbon, scale and bonded soil on castings, blocks, housings and frames.
  • Higher frequencies finer work, soft metals and finished surfaces, where a coarse field would pit the part.
  • Dual frequency where one machine has to do both, switched by the programme rather than by guesswork.

Getting this wrong is the most common reason an ultrasonic tank disappoints. A machine bought on price at the wrong frequency will either take all day or mark the parts, and neither fault shows up until it is installed.

Settle it with your own part

We test before you buy. Send the worst part you have, and the trial comes back with photographs and the cycle card that produced the result: chemistry, concentration, temperature, frequency and time. That is what the machine is then specified against.

Every clip here is a documented job

Where an application needs proving, we clean, film, gauge and document it, and the process card stays with the customer.

Talk to an engineerRead the case studies