Home / Filtration / Filter bags / Polyester felt
Filtration · Polyester felt

Polyester felt

Depth filtration in needle-punched polyester felt. Solids are held through the thickness of the media, not just on the surface, so a felt bag holds far more dirt than a mesh of the same rating before it blinds.

Made to order

This media is not held in stock. Polypropylene needlefelt and nylon monofilament mesh are — those two are priced on the site and ship from stock. Everything else, including this one, is built to your specification and quoted. Build the specification and get a price →

Specification

Polyester felt

Media codePE felt
Standard sizeSize 2 — φ180 × 810 mm, 0.5 m², 17 L
Other sizesSize 1 (0.25 m², 8 L) · Size 3 (0.09 m², 1.3 L) · Size 4 (0.16 m², 2.5 L)
Ratings1–200 micron — made to order
Max. temperatureUp to 150 °C
Ring optionsGalvanised steel · stainless steel · polypropylene snap ring
FitsEvery housing we supply — see the range

Exact ratings, ring material, surface finish (singed or glazed) and food-contact compliance are confirmed per order against the manufacturer’s current datasheet.

Polyester felt filter bag showing the collar and seam
What it is for

Where this media earns its place

Depth filtration in needle-punched polyester felt. Solids are held through the thickness of the media, not just on the surface, so a felt bag holds far more dirt than a mesh of the same rating before it blinds.

Typical duties

General process water, coolant, paint and ink, wash-bath circulation, pre-filtration.

Chemical & service notes

Good in most acids and oxidising conditions. Not for strong alkali or hot caustic — polyester hydrolyses.

Temperature

Up to 150 °C. The housing seal has its own limit — the lower of the two governs.

Other media

If this is not the right one

Priced per box · volume rates

Bag price moves with media, micron, ring type and quantity, and drops sharply at volume. Tell us the spec and your annual usage for a per-bag rate and a standing-order price. Get bag pricing →

Build it and see the price

Pick the size, media, micron, collar, handles, seam and finish. The builder gives you a part code and a full specification, and tells you whether the bag is one we hold or one we quote. Minimum five bags, then any number above that.

Build a custom bag specification →

What are you filtering?

Flow rate, fluid, temperature, particle size and how often you want to change bags. We size the housing and the bag around that and quote the pair, delivered and commissioned.

Request a filtration quoteBack to filtration