Oils and fingerprints off cadmium-plated parts
Comes offoils·coolants·fingerprints·particulate
Parts arecadmium plating·copper alloys·brass·aluminium
Also coverscadmium·copper plated·plated part·sensitive metal
Run it at3–15% (typ. 5%)·49–82 °C
AquaVantage 1696 GD →Carbon and grease off engine and turbine parts
Comes offoils·grease·carbon·buffing compound·coolants
Parts aresteel·aluminium·titanium·nickel alloys·cadmium plating
Also coversturbine blade·compressor·engine part·airframe part
Run it at7–30% (typ. 10%)·54–77 °C
AquaVantage 815 GD →Oils and coolants off precision components
Comes offoils·coolants·particulate·buffing compound
Parts arealuminium·steel·titanium·magnesium
Also coversspray cabinet·cabinet washer·precision part
Run it at3–15% (typ. 5%; 5% min on aluminium)·49–77 °C
AquaVantage 1990 GD →Paint and lacquer off alloy wheels
Comes offpaint·powder coat·lacquer·baked finishes
Parts arealuminium·zinc
Also coversalloy wheel·wheel·rim·powder coat
Run it at10% v/v of the mixed system·40–70 °C
AlloySystem →Not safe on magnesium.
Carbon, paint and rust off ferrous engine parts
Comes offbaked carbon·paint·rust·scale·grease
Parts arecast iron·carbon steel·steel
Also coversengine component·cylinder head·manifold·decarbonise
Run it at10–30% v/v (typ. 25%)·60–80 °C
MetalTek 100 →Ferrous only. Aluminium, zinc and tin are attacked rapidly and glass is etched, a single alloy part in the basket will be lost.
Ash out of DPF filters and cans
Comes offcalcium ash·zinc phosphate·magnesium oxides·mineral ash
Parts arecordierite·silicon carbide·stainless steel
Also coversDPF·diesel particulate filter·ash·regeneration·filter can
Run it atneat, no dilution·ambient–50 °C
RegeniK →Ferrous and ceramic only. Aluminium, zinc, magnesium, cadmium, tin and solder are excluded, and copper, brass and bronze can suffer stress-corrosion cracking.
Baked carbon off cylinder heads and blocks
Comes offbaked carbon·oils·grease·gasket residue
Parts arecast iron·aluminium·steel
Also coverscylinder head·engine block·crankcase
Run it at5–30% (typ. 10%)·54–77 °C
AquaVantage 815 QR-NF →Keep copper, brass and plastics out of this bath.
Varnish and carbon off valve bodies
Comes offvarnish·oils·carbon·fuel residues
Parts arealuminium·steel
Also coversvalve body·carburettor·gearbox·automatic transmission
Run it at10–20% v/v (typ. 15%)·40–60 °C
Desludge →Check the castings first. The bath runs at pH 13 and zinc, galvanised, magnesium and soft solder are attacked, a zinc die-cast body must not go in.
Mill scale and rust off steel stock
Comes offmill scale·rust·oxides
Parts arecarbon steel·stainless steel
Also coversmill scale·oxide·pickling·black scale
Run it at2.5–10% v/v (typ. 5%)·ambient–50 °C, never above 60 in ultrasonics
Descale →Acid mist rises sharply above 50 °C in ultrasonics; extraction is required.
Fats and food soils off food-contact equipment
Comes offfats·food soils·grease
Parts arestainless steel·glass·enamel·ceramic
Also coversfood·AQIS·food grade·kitchen·food contact
Run it at5–15% v/v (normal use 10%)·45–65 °C
FX Degreaser →Hydrocarbons off oxygen service parts
Comes offhydrocarbon residues·oils
Parts arestainless steel·aluminium·copper alloys
Also coversoxygen·LOX·oxygen cleaning
Run it at3–15% (typ. 5%; 5% min on aluminium)·49–77 °C
AquaVantage 1990 GD →Hydrocarbon oils off oxygen system components
Comes offhydrocarbon oils·grease·particulate
Parts arestainless steel·copper alloys·brass·aluminium
Also coversoxygen·LOX·breathing air·regulator·cylinder valve
Run it at7–30% (typ. 10%)·54–77 °C
AquaVantage 815 GD →Cutting oils and swarf off machined components
Comes offcutting oils·coolants·swarf·drawing compound
Parts aresteel·aluminium·brass
Also coversspray wash·parts washer·machined part·in-line washer
Run it at3–15% (typ. 5%)·49–82 °C
AquaVantage 1696 GD →Rust and scale off steel before painting
Comes offrust·scale·grime
Parts arecarbon steel·cast iron
Also coversrust·pre-paint·derust·passivate
Run it at20% v/v + CoreKleen Plus 1–2% v/v·50–60 °C
CoreKleen HX →Rust protection between process stages
Comes offapplied to clean parts, nothing to remove
Parts aresteel·cast iron
Also coversflash rust·rust prevention·between stages·in-process
Run it at2–5% v/v in the rinse tank·ambient–50 °C
Anti-Rust →Ferrous only. Not for aluminium, zinc, magnesium, copper or brass, the ethanolamine content attacks copper alloys.
Baked carbon and soot off DPF and EGR parts
Comes offbaked carbon·soot·tenacious oils
Parts arestainless steel·steel
Also coversDPF·diesel particulate filter·EGR·EGR cooler·exhaust
Run it at5–30% (typ. 10%)·54–77 °C
AquaVantage 815 QR-NF →Not suitable for sensitive materials. Keep copper, brass and plastics out of this bath.
Paint and powder coat off housings and covers
Comes offpaint·powder coat·baked soils
Parts aresteel·cast iron·aluminium
Also covershousing·cover·painted steel·refurbishment
Run it at10% v/v of the mixed system·40–70 °C
AlloySystem →Not safe on magnesium.
Salt and carbon off marine engine heads
Comes offsalt deposits·oils·carbon·grime
Parts arealuminium·cast iron·steel
Also coversmarine engine·outboard·seawater·salt
Run it at10–20% v/v (typ. 15%)·40–60 °C
Desludge →pH 13 in the bath. Zinc, galvanised, magnesium and soft solder are attacked.
Weld flux and heat scale off fabrications
Comes offwelding flux·weld spatter·heat scale·oxides
Parts arestainless steel·carbon steel
Also coversweld·welding·flux·spatter·heat scale·weld tint
Run it at2.5–10% v/v (typ. 5%)·ambient–50 °C, never above 60 in ultrasonics
Descale →On carbon steel and cast iron the base metal is attacked along with the scale, time-limit, rinse and neutralise. Bake hardened or high-tensile steel within 4 hours to relieve hydrogen embrittlement.
Exhaust ash off DPFs on heavy plant
Comes offcalcium ash·mineral scale
Parts arecordierite·stainless steel
Also coversDPF·exhaust·ash·heavy plant·underground
Run it atneat, no dilution·ambient–50 °C
RegeniK →Copper, brass and bronze can suffer stress-corrosion cracking. On carbon steel and cast iron, prolonged contact etches and flash-rusts, time-limit and dry promptly.
Scale and red dirt out of radiator cores
Comes offscale·red dirt·mud·mineral deposits·coolant residue
Parts arealuminium·steel
Also coversradiator·radiator core·cooler core·charge air cooler·heat exchanger·red dirt·CAC
Run it at20% v/v + CoreKleen Plus 1–2% v/v·50–60 °C
CoreKleen HX →Copper and brass cores are chelated on prolonged contact, time-limit the cycle and test a core first. Solder joints in older cores are the part to watch.
Oil and road film off radiator internals
Comes offoil·grime·road film
Parts arealuminium·steel
Also coversradiator·cooler·internal surfaces·heat exchanger
Run it at10–20% v/v (typ. 15%)·40–60 °C
Desludge →pH 13 in the bath. Zinc, galvanised, magnesium and soft solder are attacked, and copper and brass tarnish. Check what the core and headers are soldered with before immersion.
White rust off zinc-plated parts
Comes offwhite rust·zinc oxide
Parts arezinc plating·galvanised steel
Also coverswhite rust·zinc·galvanised·plated
Run it at20% v/v + CoreKleen Plus 1–2% v/v·50–60 °C
CoreKleen HX →Burned-on polymer off rubber moulds
Comes offburned-on polymer·release agent·carbon
Parts aresteel·cast iron
Also coversmould·tool·rubber mould·release agent
Run it at10–30% v/v (typ. 25%)·60–80 °C
MetalTek 100 →Ferrous only.
Rust protection for steel held in store
Comes offapplied to clean parts, nothing to remove
Parts aresteel·cast iron
Also coversstorage·pre-plating·pre-painting·soak tank
Run it at2–5% v/v in the rinse tank·ambient–50 °C
Anti-Rust →Ferrous only. Not for aluminium, zinc, magnesium, copper or brass, the ethanolamine content attacks copper alloys.
Fingerprints off vacuum and semiconductor parts
Comes offfingerprints·light oils·particulate
Parts arestainless steel·aluminium·copper alloys
Also coversvacuum·semiconductor·chamber part·high purity
Run it at3–15% (typ. 5%)·49–82 °C
AquaVantage 1696 GD →Dried ink out of anilox roller cells
Comes offdried ink·burned-on polymer·lacquer
Parts aresteel·ceramic-coated steel
Also coversanilox·roller·print roller·ink
Run it at10–30% v/v (typ. 25%)·60–80 °C
MetalTek 100 →Confirm the cell coating with the roller maker before immersion, caustic attacks some ceramic sealers.
RailImmersion / ultrasonic Grease and road grime off traction motors
Comes offgrease·oils·road grime·carbon
Parts aresteel·copper windings
Also coverstraction motor·bogie·axle box
Run it at7–30% (typ. 10%)·54–77 °C
AquaVantage 815 GD →Scale and red dirt out of charge-air coolers
Comes offscale·mineral deposits·red dirt
Parts arealuminium·steel
Also coverscharge air cooler·intercooler·oil cooler·radiator
Run it at20% v/v + CoreKleen Plus 1–2% v/v·50–60 °C
CoreKleen HX →Grease and shop dirt off workshop parts
Comes offlight grease·oils·shop dirt
Parts aresteel·cast iron·stainless steel·aluminium
Also coversworkshop·general purpose·bench·parts
Run it at5–15% v/v (normal use 10%)·45–65 °C
FX Degreaser →Aluminium only inside the data sheet window, 5% v/v maximum, 50 °C maximum, 5 minutes, then rinse immediately.
Compatibility, dilution and temperature are taken from each product’s current technical data sheet. These are documented applications, not a substitute for a trial: confirm compatibility by testing under your own cleaning conditions. The compatibility matrix is the full picture, metal by metal.